In commercial buildings, heat demand is far more unforgiving than electricity demand.

You can dim lights. You can reduce HVAC setpoints.

But you cannot tell a hotel with full occupancy, "Tonight, please use cold water."

You cannot tell a hospital, "The sterilization equipment will heat up when the sun comes back."

You cannot tell a swimming facility, "We'll warm the pool when the grid price drops."

This is why every building that runs on real occupancy eventually turns to solar heat. And if the system must be electrically assisted, the pairing almost always becomes: PVT + Heat Pump.

Not because it's "innovative," but because it is the only configuration that respects how heat demand behaves in the real world.

1. A Heat Pump is an Amplifier, Not a Source of Energy

Heat pumps do not produce energy. They move it.

With 1 kWh of electricity, a heat pump can relocate 2–4 kWh of thermal energy. That performance number—COP—depends on just one brutal truth:

The temperature of the source (the inlet)

  • Heating 10°C water to 55°C is labor-intensive
  • Heating 35°C water to 55°C is effortless

The difference is not a few percentage points. It is cURL Too many subrequests. cURL Too many subrequests.

cURL Too many subrequests.

  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.

cURL Too many subrequests. cURL Too many subrequests..

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests. cURL Too many subrequests. cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

PVT
→
Buffer Tank
→
پمپ حرارتی
→
Boiler (last)

A mature commercial system always flows in this order:

  • PVT: base thermal production
  • Buffer tank: daily energy reservoir
  • Heat pump: lift to usable DHW temperature
  • Boiler: rare peak compensation only

This is where most PV+HP designs fail:

  • The heat pump is forced to supply 100% of heat
  • The PV system only reduces electricity bills
  • The storage tank acts as a passive bucket, not a thermal engine

With PVT upstream, the building stops wasting sunlight as roof temperature.

5. Why This Combination "Feels Stable" in Daily Operation

Stability is not a number in a datasheet. It is the user experience at 6:45 AM with full occupancy.

Real commercial heat demand behaves like waves:

  • Guests start showering
  • Kitchens begin preheating
  • Laundry cycles spin up
  • Staff consumption adds up

Electricity fluctuates. PV output slides with temperature. But heat demand does not ask for permission.

PVT is already filling the system with 35–45°C energy before the peak begins. The heat pump does not start from zero—it only finishes the last 10–15°C.

This is why experienced engineers say: "PVT is the heat pump's best teammate."

6. A Real Case Soletks Solar Encountered

In a hospitality project, the operator relied on heat pumps alone. On paper, the design was clean: Heat pump → storage → return loop.

During high occupancy, something familiar happened:

  • Heat pumps ran 14–18 hours per day
  • Return temperatures fell toward 40–45°C
  • Guests reported inconsistent shower experience

The system was not failing—it was simply working far beyond its intended duty cycle.

After integrating a PVT field and buffer tank:

  • Heat pump runtime dropped by ~30%
  • Return loop stabilized
  • Compressor alarms disappeared
  • Energy cost decreased

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.
cURL Too many subrequests.

cURL Too many subrequests.
cURL Too many subrequests.

cURL Too many subrequests.
cURL Too many subrequests.

cURL Too many subrequests.
cURL Too many subrequests.

cURL Too many subrequests.
cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.
  • cURL Too many subrequests.

cURL Too many subrequests.

  • cURL Too many subrequests.
  • Expected reduction in heat pump workload
  • Target temperatures and return stability
  • Storage strategy
  • Realistic ROI range
  • An integration map suitable for your site

سولتکس سولار — Mixed energy systems designed for real buildings, not theoretical models.