A photovoltaic-thermal module combining electricity generation with rear-side heat recovery. Discuss suitability for a project that can use both electricity and recovered heat.
The published PVT-E product description couples a heat-recovery structure to the rear of the photovoltaic module. Selection should consider the electrical load and a useful thermal load together.
Rear-side heat recovery
Electrical and thermal loads
Project-specific integration
Define the electrical demand and intended inverter or grid connection.
Identify the heat load, operating temperature and storage requirements.
Confirm roof area, structure, mounting, service access and climate conditions.
Request the current model revision and the quoted supply boundary.
This page is a product-selection overview. Confirm the current supplied model's electrical, thermal and installation data before specification.
Ask for the model code and current datasheet. Product ratings, certificates, warranty and order terms must match the quoted product.
| Položka | Model Information to Request |
|---|---|
| Model and revision | Current model code, supplied revision and electrical datasheet |
| PV construction | Cell/module technology and construction for the quoted product |
| Rated output | STC power, Voc, Isc, Vmp, Imp and the stated test conditions |
| Operating behavior | Temperature coefficients and electrical output at design conditions |
| String design | Maximum system voltage, fuse rating and permitted configuration |
| Connections | Cable specification, connector type and polarity |
| Integrácia | Inverter compatibility and electrical installation requirements |
| Položka | Model Information to Request |
|---|---|
| Performance data | Thermal test curve, reference area and stated test conditions |
| Heat-transfer circuit | Approved fluid, exchanger construction and connection details |
| Prúd | Recommended flow and pressure-drop data |
| Tlak | Permitted operating pressure for the quoted model |
| Temperatures | Fluid and module operating limits |
| Ochrana | Freeze, stagnation and over-temperature design requirements |
| Useful heat | System heat demand and storage/heat-exchanger integration |
| Položka | Model Information to Request |
|---|---|
| Dimensions and weight | Current model drawing, filled/dry weight and mounting details |
| Site requirements | Roof load, mounting, access and local installation requirements |
| Instructions | Installation, operation and maintenance documents |
| Product evidence | Applicable model-specific test reports and conformity documents |
| Warranty and service | Quoted warranty terms, service parts and support boundary |
| Order conditions | Packing, order quantity and preparation/delivery schedule in the quotation |
| Supply boundary | Items included and excluded: module, mounting, controls, inverter and thermal equipment |
Heat-pump integration, pool heating and low-temperature heating are applications described in the product literature. Suitability depends on the selected model and the system operating conditions.
The module is one part of the project. Ask which electrical, hydraulic, storage and control components are included in the quotation.
Confirm string voltage/current and inverter compatibility from model-specific data.
Specify the approved fluid, design flow and operating temperatures.
Identify the building or process heat load and when it is needed.
Confirm thermal storage and heat-exchanger coupling with the selected system design.
Review circulation, monitoring and controls required by the project.
Confirm mounting, roof load, orientation, service access and climate exposure.
Review protection measures and any backup heat requirement with the system designer.
Tell us your destination country, intended electrical and thermal use, available installation area and expected module quantity. Ask for current model documents and a quotation suited to your project.
Request electrical, thermal and mechanical data for the supplied revision.
Share required fluid temperature, heat demand and installation conditions.
Describe any branding, packaging or ongoing supply requirements.
Confirm supply scope, warranty and order/delivery terms in the quotation.
Priekopnícke riešenia udržateľnej energie naprieč kontinentmi, prinášajúce inovatívne solárne vykurovacie a ohrevné systémy vody.
Odporúčané
Veľkoplošné ploché kolektory EFPC115 poskytujú vykurovanie pre 107 000 m², nahrádzajúce tradičné vykurovanie uhlím a jačím trusom. Znižuje spotrebu uhlia o 2 424 ton ročne.
Systém tepelného čerpadla TPV Pro+ spĺňa požiadavky študentov na vykurovanie a zároveň generuje elektrinu na mieste.
Supplies hot water for APEC Summit hotel. Saves 150,000 kWh annually, reduces CO2 by 74 tons.
Ploché vodné ohrievače poskytujú 200 litrov horúcej vody denne pre každú vilu v rezorte.
Kolektory s technickou triedou v sériovej/paralelnej konfigurácii zabezpečujú spoľahlivú dodávku teplej vody.
Inovatívne riešenia poháňané špičkovou technológiou a udržateľnými postupmi
SOLETKS je high-tech podnik zameraný na inovácie v oblasti čistej energie. S jeho jadrom Ploché kolektory čistej tepelnej energie technológia, spoločnosť integruje solárnu, geotermálnu a vzdušnú energiu na poskytovanie efektívnych riešení pre vykurovanie, chladenie a výrobu energie.
S podporou partnerstiev s poprednými výskumnými inštitúciami sa SOLETKS radí medzi popredných svetových výrobcov plochých kolektorov, čím poháňa globálny pokrok smerom k udržateľnej budúcnosti.
Pokročilá technológia plochých kolektorov maximalizujúca energetickú účinnosť
Špičkové inovačné portfólio chrániace patentované technológie
Strategická spolupráca s poprednými inštitúciami na celom svete
Trusted by Industry Leaders Worldwide
From residential installations to large-scale industrial projects, SOLETKS delivers proven solar thermal solutions across continents, empowering sustainable energy transformation globally.
ISO management-system certificates describe organizational management, rather than product certification for every model. Product test reports, Solar Keymark scope and CE documentation should be confirmed for the selected product and destination market. Request current model-specific documents before ordering.
Protokol o skúške
Správa o zabezpečení kvality
Solar Keymark
Európska norma kvality
ISO
Medzinárodná organizácia pre normalizáciu
ISO
Medzinárodná organizácia pre normalizáciu
ISO
Medzinárodná organizácia pre normalizáciu
Produkt
Certifikácia produktu
Produkt
Certifikácia produktu
Produkt
Certifikácia produktu
Solar Keymark
Európska norma kvality
Produkt
Certifikácia produktu
Produkt
Certifikácia produktu
ISO
Medzinárodná organizácia pre normalizáciu
ISO
Medzinárodná organizácia pre normalizáciu
ISO
Medzinárodná organizácia pre normalizáciu
Solar Keymark
Európska norma kvality
Solar Keymark
Európska norma kvality
Produkt
Certifikácia produktu
Produkt
Certifikácia produktu
Produkt
Certifikácia produktu
Produkt
Certifikácia produktu
Produkt
Certifikácia produktu
Popredný poskytovateľ riešení termálnej energie v Číne
Vysoko výkonné solárne termálne systémy vyrobené z pokročilých materiálov a viac ako 160 prísnych kontrolných krokov pre dlhodobú spoľahlivosť.
Compare the quoted system design and operating requirements against your project's useful electricity and heat demand.
Systémy s plochými kolektormi na mieru navrhnuté pre rôzne podnebia, priemyselné odvetvia a požiadavky na inštaláciu.
Neustály výskum a vývoj podporovaný 117 patentovanými technológiami, ktoré napredujú v solárnej absorpcii a integrovaných energetických riešeniach.
Discuss technical guidance, installation documentation and any project support requirements.
Poskytovanie udržateľných energetických riešení zákazníkom v rôznych regiónoch s lokalizovanými servisnými sieťami.
Request available model-specific test reports and conformity documents for your destination market.
Confirm warranty terms, service parts and technical support scope for the selected model in the quotation.