An integrated solar water heater combines the collector and hot-water storage tank in a compact rooftop assembly. Select the correct configuration based on local water pressure, useful storage, roof load, climate and installation access.
Request Integrated Heater Quote on WhatsApp ↗Review System Specifications ↓
An integrated solar heater packages the collector and tank together, commonly on the roof. A split solar heater separates collector and storage, allowing a different storage location and hydraulic arrangement. These are distinct products with different structural, service and plumbing implications.
Collector and storage tank share the rooftop system assembly. Verify full operating weight and local roof support.
Pressure configuration and circulation method depend on model. Never assume all integrated systems are non-pressurized or mains-pressure capable.
Consider water chemistry, tank access, roof exposure, freezing risk, mixing control and auxiliary heating requirements.
For remote tank installations, compare the เครื่องทำน้ำร้อนพลังงานแสงอาทิตย์แบบแผ่นเรียบแยกส่วน. For forced-circulation selection, read Forced Circulation vs Thermosiphon.
| รายการ | Buyer should confirm | ทำไมเรื่องนี้จึงสำคัญ |
|---|---|---|
| Available capacity and usable draw | Exact nominal tank volume, delivery-temperature assumptions, hot-water mixing and recovery | Product fit and household demand |
| Collector type and thermal performance | Model, absorber/tube design, tested output and reference area | Real energy yield across markets |
| Tank and wetted materials | Corrosion protection, potable-water compatibility, water chemistry limits, insulation | Service life and warranty conditions |
| Water pressure and circulation | Potable and collector-loop ratings, operating method, connection details | Safe installation in the target market |
| Full assembly weight and dimensions | Roof loading, mounting pitch and access | Structural and installer feasibility |
| Freeze / stagnation / backup | Suitable climate protection and heater controls | Year-round operation and safety |
| OEM and export package | Branding, packaging, spares, MOQ and available certificates tied to exact models | Import, distribution and after-sales readiness |
No blanket capacity suitability, tank warranty, certification, efficiency or solar savings is assumed on this page. Confirm each statement against the current model specification and the project's installation conditions.
Estimate actual daily hot-water demand, peak use, inlet temperature, roof orientation, available load-bearing capacity and the need for backup heat. Tank nominal size alone does not determine hot-water comfort.
Identify gravity-fed or pressurized water conditions and confirm exactly which configurations the proposed model supports.
Compare region-specific water quality, frost conditions, installer skills, replacement parts, packaging and the manufacturer's current product documentation.
No. Tank construction and pressure configuration must be confirmed for the exact model and target market.
No. Roof area, structural capacity, wind/snow design, access and loaded tank weight must be assessed before installation.
Discuss the required branding, packaging, quantity and market compliance documents with SOLETKS. Availability and commercial terms depend on the model and quotation.
Send the market/country, preferred capacity, water-supply pressure, climate, installation type, estimated quantity and branding needs. Ask for current model sheets, bill of materials, export packaging, applicable reports and confirmed delivery terms.
Get OEM / Integrated Heater Quote on WhatsApp ↗No forms: WhatsApp is the primary sales inquiry channel.